Garage Door Spam (blog.harrison.page)

625 points by harrisonpage 3 days ago

262 comments:

by dietsche 7 hours ago

The Chaimberlain / MyQ situation is terrible. I strongly recommend avoiding them all together.

I recently installed a Chaimberlain garage door opener in a location that required three buttons inside the garage. They limit the buttons in software, so that each garage door opener can have only two at any given time!

After some tinkering, I discovered that the Chaimberlain buttons transmit their signal wirelessly these days, even when "wired" to the garage door opener... the wires only provide power. So...

I worked around the problem by placing a dab of solder on one of their security+ 3.0 buttons so that it is always "pressed." Then I wired up the three old school garage door momentary switches to send power to it. When pressed, they power up the Chaimberlain button, which then sends a wireless signal to open the door.

by dhc02 6 hours ago

I cannot recommend a ratgdo[1] highly enough. Since getting one and wiring it to my Chamberlain opener two years ago and hooking it in to home assistant, I haven't logged in to myQ a single time, and should never need to. My family don't even have the myQ app anymore.

[1] https://ratcloud.llc/

by anamexis 6 hours ago

The latest Chamberlain openers (Chamberlain Security+ 3.0) don't work with this. There is no wired connection to operate the door, and the wireless operation is completely locked down.

by kubik369 6 hours ago

I would bet that there are connectors/test points on the board inside that would be reasonably easy to hook into. Naturally, that is a bit more involved than just hooking up a wire, but still not an insurmountable obstacle if one is already trying to do something like this.

by mrandish 2 hours ago

Normally, I'd agree but they are well aware of both software and devices attempting to work around their cloud lockdown and very aggressively trying to block any local control.

It's also important to understand they are backed by a private equity firm spending a lot money buying up the other leading garage door companies. This isn't just a preference to keep people in their cloud if possible, it's a long-term plan to corner the market and distribution channels and then start locking all remote features behind $ubscription pay walls and all their non-Chamberlain brands will do it too.

They've already shown they're willing to increase BOM costs on stuff that only locks out local-only use.

by ranit an hour ago

Looks like the perfect time for a disruption of that business model.

by bornfreddy an hour ago

My thoughts exactly. Worst case, you get bought out by them.

by citizenpaul 6 minutes ago

So as usual all you need to know is "purchased by private equity" the amount of times this results in anything other than enshittification is probably less than 0.1%

by odo1242 an hour ago

There are other garage door openers, just use those at that point

by anamexis 5 hours ago

Could be, but also since the opening is exclusively controlled by software, they may not have any need for such connectors. I would check, but they're not particularly easy to poke around once they are installed.

by labcomputer 4 hours ago

But like, there’s still a physical button on the remote, right? Why can’t you just solder a couple wires to the button on the remote?

by anamexis 3 hours ago

You can, but that by itself does not give you the garage door state (open or closed), just a blind toggle.

by yakk0 an hour ago

I used a Meross device in our old home that came with sensors to install and detect the door state. If I remember correctly, the connection between the device and the opener was through a wireless remote that we paired with the opener like any other remote.

by JoshTriplett 2 hours ago

It's easy to get the garage door state with a sensor: https://ratcloud.llc/products/ratgdo-encoder

by tshaddox 29 minutes ago

I have this even cheaper/simpler Zigbee tilt sensor that just sticks to your garage door. $12 on Amazon: https://www.amazon.com/dp/B0CZP2CJXF?plpRedirect=mhFallback&...

by toomuchtodo 5 hours ago

Can you use a paired wireless remote paired with an open interface that closes the necessary contacts on the remote?

by 1-more 4 hours ago

I tried this with mine. I had a homekit garage door thing that had worked at my old house, and figured I could have it just push the button on a wireless remote paired to my new garage door opener, so I ordered this a generic garage door opener with the button contacts broken out. That would not pair with my stupid myQ garage door opener. I got a radgdo and it works like a Swiss watch. I love whoever got mad enough to get PCBs made for it. It's a great piece of technology in my house.

by anamexis 5 hours ago

That's what I ended up doing, this thingy physically presses the button: https://www.thirdreality.com/products/smart-garage-door-open...

by chriscjcj 5 hours ago

This is how I have been opening and closing my garage door for the last 10 years.

One of these:

https://www.insteon.com/products/io-module-garage-door-contr...

...with the contact closure wires soldered to the button of a car remote.

Controlled by Universal Devices isy994i/eisy.

I do have to change the battery in the remote every five to six years or so.

by wwarren 6 hours ago

It's just a matter of time though right. Claude, bruteforce this protocol!

by anamexis 6 hours ago

I hope so!

by gedy 4 hours ago

> It's just a matter of time

..before they stop allowing this, especially after IPO

by CamperBob2 2 hours ago

DeepSeek 1017 and GLM 5.3 may be the best open models we ever get, because even the Chinese are slamming the door on reverse engineering at this point.

But fortunately those two models are good enough to do stuff like this.

by drnick1 an hour ago

> because even the Chinese are slamming the door on reverse engineering at this point.

The future of reverse engineering is abliterated models running on your own or rented hardware.

by darkwater 4 hours ago

The original post and your comment made me discover this and now reading about

  The ratgdo encoder is a precision sensor that tracks your garage door's physical state. It enables your ratgdo control board to detect the door's exact position and direction of travel in real time—whether it's fully open, closed, or anywhere in between.
I feel dumb implementing my own "sliding door open/closed/in-between" sensor with 2 cheap zigbee door sensors and some logic in Home Assistant
by ajcp 6 hours ago

Would love to know how easy this was and how well it works with HA.

by blacksmith_tb 42 minutes ago

Great for me, I had mine all set up in HA with an older overhead Chamberlin opener, and then had that replaced with a jackshaft opener. I had to reflash the Ratgdo (for the new security protocol) but it wasn't any harder to set up once I did that, now it's working perfectly once again.

by freeplay 5 hours ago

Incredibly easy. Connection is a couple of wires, no soldering.

Home Assistant integration is flawless. There is esphome firmware for the ratgdo (instructions in their official docs) and if you're familiar with esphome, you know how well it works with HA. Very low latency and 100% local.

It also allows me to setup useful automations like locking all remotes at night so if someone breaks in my car, they can't hit the button to open the garage.

by NordSteve 5 hours ago

I will second the use of RATGDO for these Chamberlain openers. Easy to set up and works flawlessly. Have one on an older opener and one on a RJO101.

by adregan 4 hours ago

Hardest part was installing it while on a ladder, but it was pretty simple from what I remember.

by ebruchez 3 hours ago

It's been working flawlessly for me with HA for years now.

by chaostheory 3 hours ago

Knowing companies like Chamberlain, hopefully they don’t start legally bullying ratgdo with things like “patent infringement”

by theideaofcoffee 4 hours ago

This is a fantastic product, but man, do tech people have trouble with branding. "Is it Rat Guh-do? Rat-du with a silent g?". It's almost as bad as naming everything "yet another...".

Maybe call it "How I learned to stop worrying and love the garage door opener" or "HILTS-WALT-GDO" for that extra eye-rollingness.

by anamexis 6 hours ago

I also recently installed a Chamberlain garage door opener. I wanted to get it hooked up to Home Assistant and/or HomeKit, but was dismayed to find that they completely lock it down, your only option to operate it remotely is with their horrible, ad-ridden MyQ app.

I ended up purchasing a Matter device which physically presses the button on a factory remote [1]. Ridiculous that such a solution needs to exist.

[1] https://www.thirdreality.com/products/smart-garage-door-open...

by IncreasePosts an hour ago

What's even more horrible is that at least the MyQ app is free...whereas if you own a Tesla(whose control interface is basically just an Android tablet) and want to be able to push a button on there to open your garage door, you need to pay MyQ $45/year for the privilege.

by verelo 5 hours ago

OMG so i recently tried to implement the ability to open my garage door, a MyQ door, and discovered all this.

What a mess. I regret letting the installer use this opener. I was hoping i could just figure out what the Android app, or my Tesla does, to open the door and replicate that. Turns out I cant.

by IncreasePosts an hour ago

At one point(before I installed ratgdo), I had an Android emulator running, and could trigger home assistant to open the MyQ app on it and press the button. Not sure if that still works but it might if you don't want to buy any extra hardware

by ghostbrainalpha 4 hours ago

I loved how well the Tesla worked, but I'll die before paying a subscription to open my own door.

by verelo 4 hours ago

Same. I kept it installed just so i can do it from within the car, but they sure do make it difficult to access in the menu.

by ToucanLoucan 7 hours ago

Jesus I apparently lucked out when I got mine, late 2018? New enough to work with my newer car's openers but old enough where it was just done with a button and a long wire. I was even able to use the existing laser for the obstacle detection bit.

TBQH I used myQ to link it to HomeKit and literally haven't once opened that app since. Sounds like I should keep that going if at all possible.

by devilbunny 6 hours ago

> New enough to work with my newer car's openers

FYI, the openers built into cars are very adaptable - my work has old school DIP-switch security on the garage gates, and it learned that just fine.

by ToucanLoucan 5 hours ago

Ah, I was referring to the one built into my 2010 F-150. It doesn't support rolling codes so I had to stick with the clip-on one that came with the opener, but my 2018 Corvette's opener had no issues pairing. Took longer to setup the ladder to go tap the button on the opener than it did to actually complete the pair. Admittedly though I don't know much about these particular protocols.

by andrewjf 6 hours ago

Yeah I have a similar timeline for my MyQ garage door openers. House built in 2018 and I got the MyQ HomeKit bridge in 2021 or something (when I moved in). It was a massive pain in the ass to setup due to sporadic paring failures and multiple factory resets of the openers themselves… but once I got it working it’s been hands off and no MyQ app.

It’s been great but I know I’m on borrowed time.

If the garage door breaks I’m 100% NOT replacing it with another chamberlain. Good job guys

by AceJohnny2 2 hours ago

The Apple App Store Review Guidelines 4.5.4 [1] have this to say:

> Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.

I am frustrated that Apple isn't using their gatekeeping powers for good. I wonder if users can file a complaint.

[1] https://developer.apple.com/app-store/review/guidelines/#des...

Edit: yes, users can file complaints. If you are an Apple Developer, you can do so via https://developer.apple.com/help/app-review/safe-and-trusted...

You can also follow "Report A Problem" link at the bottom of the App Store's page for the app.

by trestacos an hour ago

We really need to start moving to app platforms that give you more control over notifications. It's really disappointing that developers are bundling their marketing and "useful" notifications and apple does nothing about it. At this point, apple knows developers do this and doesn't do anything about it.

What would this look like? Web apps that give you more control over what specific notifications you get.

by nikanj an hour ago

Even if Apple did something over it, marketing would still send the spam, and then the CEO would yell at engineering because the notifications are broken

by blauditore an hour ago

The best thing you can do is giving such apps a bad review. This actually hurts them a bit, and provides feedback to other users and the company.

by zamadatix 2 hours ago

The thing is it's probably not against those quoted terms. You don't need push notifications to open the app and check the status and you have to give consent to enable the notifications.

I.e. the rules above don't say "denying push notifications must not make the app less nice to use and consent for ad push notifications must be able to be toggled separately from other types of push notification consent".

They should, but that complaint probably needs to be directed at Apple.

by datadrivenangel 2 hours ago

"Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages."

Apple says that you must separate promotional marketing push notifications from regular push notifications, and allow users to opt out. this is in direct violation of that rule.

by wallst07 9 hours ago

Apps for devices that I purchased that show ads is probably one of my biggeset tech pet peeves.

I will sell/replace/throw every device if I see a ad in the ecosystem. Almost every IOT manufacturer does this crap so it gets more difficult. Moving the device to Home Assistant helps a little.

Ecobee you're next, and I hope you go down in flames having such crap software.

by deadnomore 7 hours ago

This is why I see no point paying for streaming services that also insert ads. I’ll gladly pirate and feel zero shame or remorse.

by rplnt 5 hours ago

Also why I would not even consider paying for youtube. Removing maybe half the ads is not such a great value.

by saberworks an hour ago

There are a bunch of replies to this comment saying that people are seeing no ads since buying YouTube Premium. I also pay for YouTube Premium and there are definitely ads.

  * Youtube Featured - these are ads, you can close them.  They don't play during the video, but they show up in the UI
  * Youtube Featured Games - these are ads and show up in the browse UI
  * Sponsored product links - show up during the video -- these are ads
  * Youtube Preview - These are ads for shows by other channels, and they also show up in the UI while browsing, not while playing videos.  But they are ads.  Ads for shows on other networks that you can subscribe to through Youtube (extra fee)
Just because it's not a pre-roll video ad doesn't mean it's not an ad. Also, Youtube/Google is still harvesting all your browsing and viewing history and likely using that for targeted advertising on other google properties.
by aspbee555 5 hours ago

Youtube is the only streaming service I pay for (as I also get music) and I get zero ads from Youtube (creators commonly have their own sponsors but that is a separate thing and also avoidable)

the day they interrupt me with ads in addition to paying will be the day I stop paying

by bronco21016 4 hours ago

Ironically, if you have the paid tier that has zero interrupting forced ads, you can almost always also skip the creator's ad segments using "skip ahead". Its like YouTube said if we can't show ads you can't either. It's just a weird observation.

by the_lucifer 2 hours ago

> Ironically, if you have the paid tier that has zero interrupting forced ads, you can almost always also skip the creator's ad segments using "skip ahead".

Yep, it feels off because this was a desperate attempt to duplicate the experience of the excellent Sponsorblock[1] extension after users started asking Google the very logical question of why free users with Adblock+Sponsorblock were having a much better experience than paying YT Premium subscribers.

Honestly even with premium, this makes a ton of sense than Google's implementation as its categories cover a lot more. Data's crowdsourced and I've probably come across maybe <100 videos in my ~4 years+ of using it that don't have segments marked, and it's a single keystroke to mark beginning and end of segments to report them. My stats:

> You've saved people from 24,660 segments ( 18d 21h 16 minutes of their lives )

[1]: https://sponsor.ajay.app/ for many browsers including Firefox, Chromium, and Safari

by stronglikedan 3 hours ago

I pay for Youtube and haven't seen an ad since I started. I suppose if sponsor spots (which pay creators) and ads (which pay YT) are conflated, then one could think they're still seeing ads, but even then it would we waaay more than half instead of "maybe half" removed. And the jump ahead feature available on premium even makes sponsor spots irrelevant.

by lopis 5 hours ago

I was almost paying for Youtube shortly before they introduced shorts. I actually used Youtube a lot, and followed many channels. But the app got so much worse post-shorts, so many creators quiet, and their content always gets buried. So I switched NouTube.

by CamperBob2 2 hours ago

It removes all the ads, apart from what the creators choose to include. YouTube can't do anything about those for (hopefully) obvious reasons.

by pornel 4 hours ago

I'm now only buying devices that work locally with Home Assistant, or dumb devices that I can stick esp32 into.

I've learned my lesson from a pile of e-waste by manufacturers who stopped updating their apps and killed their cloud services.

by boznz 2 hours ago

No need to buy new, lots of eWaste/landfill can also be easily re-purposed. I've had a lot of success replacing control PCB's with much simpler home-built PCB's and keeping all the good stuff. My last was a Pioneer Surround-Sound amplifier <https://rodyne.com/?p=3380>, but done the same with other smart devices.

by klinquist 5 hours ago

HomeAssistant can control the Ecobee through the HomeKit protocol on the local LAN (You do not need any apple devices to take advantage of this).

by egorfine 5 hours ago

> I will sell/replace/throw every device

doesn't matter. you have already paid for the device. at this point you are worthless to the company. they might maybe squeeze another few bucks from you by spamming in the notitications.

by akifbayram 6 hours ago

Anker/Eufy does this. Very unnecessary especially after spending loads on their robot mop.

by plagiarist 4 hours ago

Anker/Eufy are on my permanently banned companies list after they decided to upload video feeds from cameras. I have never owned one of their cameras so this is entirely on principle. I used to buy their chargers and cables all the time and now I choose another company.

by lopis 5 hours ago

I got an LG projector and the official LG app to control it is just cancerous. Ads, recommended movies and shows, and just soo slow. I dread each time the app updates, because they add something else. Last time was "AI" and voice controls that I keep triggering by accident. Home Assistant detected the projector in the network, and now I can control it instantly. I would be less mad about ads if the apps provided any user value. But no, they always only worsen the user experience.

by xref 3 hours ago

Woke up this morning to an ad in the Ecobee app for Black Friday savings or something, this post was the top hit on google

by avaer 9 hours ago

It's the hijacking of notifications that gets me the most. App store providers should ban any application that puts ads there.

Also would be nice to have a law making ads and payment mutually exclusive. Otherwise the future is one where all products evolve to have both.

The "free market" cannot solve this in a world where products can be (and are) rugpulled to have ads anytime.

by zf00002 8 hours ago

My bank sends me emails that are ads for their other services but I guess if they mention my account and claim the email is for account purposes or something they get to claim it's not spam and I can't unsubscribe.

by wilkystyle 8 hours ago

100%. I heavily leverage Gmail filters for this and it works very well most of the time.

by steve_taylor 8 hours ago

Apple used to forbid marketing notifications, but they relaxed their policy a while ago.

What's really needed is system-wide notification channels, a hard requirement on app developers that marketing notifications go into the marketing channel, per-channel notification permissions, and a global off-switch for marketing channel notifications.

Apple needs to break this shitty business model. There's no incentive for Apple to keep allowing it.

by enragedcacti 5 hours ago

Android has had most of this for a while now, though Google's policing of it isn't that great. They have notification categories that can be disabled on a per-app basis, and the app quality guidelines specify the following:

> Don't use notifications for cross-promotion or advertising of another product, as this is strictly prohibited by the Play Store.

> Notification channels are defined according to best practices, rather than serving all notifications from one channel.

I was surprised by the first one as it does feel fairly common, though in my experience apps that do almost always have them grouped in a marketing category so it's easy to avoid after the first one.

https://developer.android.com/docs/quality-guidelines/core-a...

by dv_dt 6 hours ago

I delete the app that sends so notifications. In a few cases I shut off the notifications.

by kalleboo 8 hours ago

They relaxed their policy because they themselves were doing it and it seemed too hypocritical even for them

by dolmen 6 hours ago

> Also would be nice to have a law making ads and payment mutually exclusive. Otherwise the future is one where all products evolve to have both.

I bought a TV. I don't want to see ads displayed on it.

by ubermonkey 7 hours ago

>hijacking of notifications

This is why I don't let DoorDash send notifications. I just have to watch the app for our delivery, bc if I let them ping me it's a nonstop stream of advertising.

by jhowar59 8 hours ago

Add the US Postal serverice and their 'Informed Delivery' to this list of organizations using notifications of mail that turn out to be ads.

by trollbridge 8 hours ago

Eh, it’s just notifications of mail without alteration of the content of that mail. Not really the same thing.

by jhowar59 8 hours ago

It's digital flyers that aren't actually part of my physical mail. Just advertising.

by Barbing 5 hours ago

Do they keep that part undocumented? TIL they have a program that allows marketers to make their flyers clickable.

https://www.usps.com/business/informed-delivery.htm (Interactive Campaign Guide PDF https://www.usps.com/business/pdf/informed-delivery-interact... )

If they’re just spamming, then the opt out pre-screen won’t apply, which is unfortunate ( https://www.optoutprescreen.com/form - request no junk mail there)

by wholinator2 7 hours ago

Really? I got it about 6 months ago and i haven't noticed any spam yet, maybe it's just getting filtered by gmail automatically.

by euroderf 9 hours ago

> Also would be nice to have a law making ads and payment mutually exclusive.

Likewise for online content. Hello, New York Times. Et al.

by bookofjoe 9 hours ago

I pay plenty for a New York Times subscription and the content is riddled with huge ads.

Today's front page screenshot 3 minutes ago:

https://imgur.com/a/1hgKeKf

by MPSimmons 8 hours ago

To be fair, this isn't new. It's as old as newspapers themselves.

by bookofjoe 8 hours ago

True, but ads are a LOT less annoying when they're printed on paper.

by flkiwi 6 hours ago

"Punch the Monkey" was the point of no return, and that was decades ago at this point.

by tiew9Vii 8 hours ago

Have a ceiling fan, it also supports smart control via Tuya.

It’s disturbing opening Tuya, to control the fan, only to often have to scroll past a big ad for Temu dildos and sex toys!

Nothing against dildos and sex toys but I don’t want to see them to use my ceiling fan and the ad profiling must be pretty terrible for a middle aged bloke with no browsing history of dildos and sex toys, trying to turn a fan on, not the misses.

Luckily I can mostly use the home assistant integration but still need to use Tuya for the sleep timer functionality.

Also waiting for the day the smart control stops working as the app shustdown. Specifically purchased the fan as it’s a dc fan with wall controller and smart controls was supplemental to that so not the end of the world but would it be if I purchased it for the smart controls was.

by zzygan 7 hours ago

I have a fan device as well that’s basically the same thing, used Claude to hack local Tuya to make sleep timers and color light dimming work without the cloud integration. Side effect is also that it’s instantaneous rather than super laggy like it was with cloud.

by rckoepke 6 hours ago

I use this to jailbreak my Tuya devices and run them locally with HomeAssistant. I also create my own custom firmware for them to enhance their capabilities.

https://github.com/tuya-cloudcutter/tuya-cloudcutter

by SamuelAdams 5 hours ago

Apple does this with Wallet, yet everyone seems to look past that. I currently see "Apple Card: up to 3% back on all your Apple Pay purchases.", on iOS 27.2.1.

by jareklupinski 9 hours ago

the noise i made after setting up my pihole and seeing an ad for some Apple Service Subscription inside the _Settings_ app

"it's gotten inside the code! run!"

by cloudfudge 5 hours ago

Wyze cams have gone absolutely apeshit with spam in the last couple of months. They have several different ways to opt out and if you don't find them all, you still get spam push notifications about their latest iot garbage heap offerings.

by baggachipz 7 hours ago

> Ecobee you're next, and I hope you go down in flames having such crap software.

Oh no. They were on my "next up" list when my Nests inevitably get killed by Google. At least with the Nests, I use a Starling Hub[1] so that I don't have to have Google's shitty app on my phone and can just use HomeKit.

What's the best HomeKit thermostat now?

[1] https://www.starlinghome.io RIP, thank you shitty US government orange menace.

by PotatoPrime 6 hours ago

FWIW, I have ecobee thermostats, and have been mostly happy with them. I use iPhone, and haven't had a problem with notification spam. I get my maintenance reminders, and then 'power events' which is where I've tied into the power company, and they give a money credit if they can raise/lower my thermostat in 4 hour windows during peak capacity.

One thing that has actually made me really happy with the ecobee, is beestat.io, which is a website that will attach to your cloud account via API and offers some nice visualizations for your thermostat data. I don't use the ecobee website directly for anything, so maybe that's the crap software he's referring to.

by jwcooper 6 hours ago

> What's the best HomeKit thermostat now?

Probably the upcoming "Apple Home Collection" Thermostats [1] as I'm guessing they will be tightly managed by Apple. We'll see with reviews though.

https://www.apple.com/shop/home/accessories/smart-home-acces...

by ubermonkey 7 hours ago

Years ago, the combination of my forgetfulness and our urban address led to some thefts -- turns out, the garage is far more secure if you remember to close it.

I looked around for some kind of device that would close it automatically, which apparently doesn't exist -- with good reason, honestly. What I found was a weird little IoT box that functioned as a garage door opener, and which I could configure with an app on my phone to yell at us (via notifications) if we left the door open for more than 5 minutes.

An unsought side benefit that nevertheless became handy was that we could now control the garage door with our phones.

That app was, initially, pretty straightforward and clean -- but over time, fucking ADS crept in. I was about ready to shift platforms to avoid that crap when we moved across the country. We lived in our new place first in a rental while we house-hunted, so I did nothing there, but I absolutely planned to find an ad-free owner-respecting platform for my garage needs in the new house.

Except, well, the house we bought had (has) a pretty dang new opener, and it's delightfully almost-silent, and it has the MyQ stuff built in already. So I'm right back where I started, cursing these craven weasels every time I use the app to get into the garage.

Somewhat ironically, though, our need for this tool has flipped. Now we live in a very secure neighborhood -- kids leave their bikes on their front lawns, etc -- so the "yell at me if I leave it open" function isn't as important. OTOH, since I haven't been able to find a suitable garage door opener that will mount cleanly on my motorcycles, using the phone to get into the garage has become the default.

by StillBored 6 hours ago

"I looked around for some kind of device that would close it automatically, which apparently doesn't exist."

I picked up the ratgdo to solve this exact problem, but discovered that it can't detect the garage door state without upgrading the "button" / "control panel" on the wall to one that actually communicates with the opener rather than just basic open/close functions. The recommend button is the 889LM, which, get this, has a close delay function. AKA you open it, and it automatically closes it within a set delay after people stop walking through the safety beam.

So, while I have the HA integration now via the ratgdo, the function I wanted it for is handled automatically.

by rootusrootus 6 hours ago

> some kind of device that would close it automatically, which apparently doesn't exist

Chamberlain has auto closing built in to some of the regular wall controls. Ben using them for years.

by wat10000 5 hours ago

It's atrocious. The worst part is that you might buy a device with a perfectly nice app with no ads, and then years later the vendor updates the app and you're stuck with horrible ads.

The best approach seems to be to only buy devices with official HomeKit support, and pray that Apple doesn't start putting ads in the Home app.

by drnick1 36 minutes ago

> The best approach seems to be to only buy devices with official HomeKit support

No, the best approach is to buy devices that run open firmware and play well with Home Assistant. Anything closed source and controlled by a corporation is subject to changes to terms and conditions sooner or later, and will collect telemetry and do other nasty things to users.

by superultra 7 hours ago

It’s super cool this person did this but even with AI, it’s a super power a normal user can’t pull off.

The notification marketing spam is really bad right now. I can literally turn off every marketing toggle in the Uber app (buried as it is), save it, then swipe out of those settings, then back in, and the notifications are all enabled again. Same goes for a lot of other apps, like the Dominos pizza app.

It’s gotten to the point where I just install the app, use it to order a pizza or a ride, the. uninstall the offending app (though sometimes I still get ghost notifications!)

But for apps like those for garage doors, that’s not a viable strategy.

I know why these notifications happen. The open rate ranges from 5-20% (though up to half of these can be accidental, but at least you got them back into the app, right).

But it really feels like an intrusion on the iOS and Android in ways that can compromise usage of the phone. It seems like at least Apple used to care about this and maintain UX standards but it seems like that has gone out the window.

For people who can’t jury rig a solution to their garage door opener, what can they do?

by kccqzy 4 hours ago

I turn off notifications completely in the Uber app, Lyft app, DoorDash app and similar. I don’t need them. If I’m waiting for the driver to pick me up, I just keep the app open and watch the driver drive towards me anyways. I definitely don’t want to do something else on my phone while the driver is waiting.

For food delivery, the gig workers usually knock on the door, or ring the doorbell. If they don’t, hunger will remind me to check the app anyways.

by jeromechoo 4 hours ago

I jury rigged a garage door opener that failed on the magnet sensor. I think it had something to do with the Texas heat. Eventually found a small company called Tailwind that manufactures kits you can install fairly easily on most garage door openers. The system is rock solid and very fast. Even though it’s cloud based it has been far more reliable than my own solution. Highly recommended.

by dmeiz 5 hours ago

What would it take to make a product that worked the way people want, without ads and marketing? I was thinking about this after dealing with a broken dishwasher and HVAC system. Even the repair guys were saying that nothing lasts any more. My refrigerator is another example where I've had to spend a few hundred bucks twice to fix it and it's not that old.

Are the economics such that it's just not possible to start a company making decent, servicable products?

by jen20 5 hours ago

> Are the economics such that it's just not possible to start a company making decent, servicable products?

Largely, yes. If you make a washing machine that lasts 20 years, you sell one washing machine. If you make one that lasts just beyond its warranty period, you might lose that customer for a minute, but there are so few actual manufacturers to pick from that you soon run out.

The negative externalities are not currently priced into cheap shit.

by pbhjpbhj 4 hours ago

I think capitalism is entirely incompatible with economy (minimising waste), in particular the economy of optimising product lifetime.

There are some products that fit, see the Buy It For Life movement, but they tend to be very low-tech, like cast-iron pans.

by plagiarist 4 hours ago

It is only compatible if you make assumptions like consumers have infinite money, infinite time to research, zero cost and risk for setting up competitive companies, etc.

by mschuster91 3 hours ago

> Are the economics such that it's just not possible to start a company making decent, servicable products?

Oh you absolutely can, the problem is that the siren's lure of monthly recurring revenue is far too strong.

by lopis 5 hours ago

This year, LinkedIn has reset my notifications preferences twice. Do you know how many notifications you need to turn of in the website, one by one? I don't know either, because it's dozens. This is despite GDPR and me not agreeing to marketing e-mails. It's literally illegal, but not enforced.

by plagiarist 4 hours ago

I have seen companies develop a "new" category of spam and suddenly they are legally allowed to send me the same ads I have already opted out of.

by BeetleB 6 hours ago

On Android, BuzzKill is the way to go.

And for stuff like Domino's, why do you need notifications? Just turn off all its notifications at the Android level.

by camel_Snake an hour ago

I'm confused why you need a separate app for this? In Android just long press the notification, select the gear icon, and it will display the notification categories you can individually toggle if you want more customizability than just disabling all notifications from an app.

by BeetleB an hour ago

The point he was making is that the categories is unreliable. They'll sneak in marketing notifications in other channels, or just not give enough granularity.

With BuzzKill, you can have rules like "Block all messages except those that contain <text>". This way, you can still get notifications related to orders/delivery.

by dreamcompiler 6 hours ago

When I order a pizza delivery I need to see notifications so I can meet the driver downstairs.

by cwnyth 6 hours ago

They can't ring your doorbell?

by offbyone 4 hours ago

They often don't; most of the time the only way I know the delivery happened is if I hear them on the steps, or the app notifies me.

by gus_massa 5 hours ago

Some deliveries here press the button in their app when they are a few blocks away, so you go downstair and wait for them at the door. :(

by giglamesh 6 hours ago

Perhaps not? We haven't had a working doorbell in > 10 years. Don't miss it at all. I'm guessing I am not alone in this regard.

(We live above the ground floor in a multi-unit building. This brilliant life hack may not be applicable in all situations.)

by luisgvv 6 hours ago

You've never had lazy or passive delivery drivers apparently

by BeetleB 3 hours ago

Note to self: Never give tip in app.

If they can't be bothered to ring the doorbell and wait for me, as was the norm for pizza delivery drivers since forever, they won't get a tip.

Now if you mean 3rd party delivery for stuff that isn't pizza, that's a different story. At some level, though, I'm just not sympathetic. Delivery is not cheap, and has all kinds of problems, including all the ones highlighted in this thread. If you think dealing with all of this (including notification issues) is worth the hassle, by all means, accept your reality. I just go to the restaurant and pick up myself.

by BeetleB 3 hours ago

You're not the person I was asking, but if you were, I'd point out manually enabling/disabling notifications for the app when you order would be a lot easier than installing it each time (as he is doing).

by hobo123 5 hours ago

I hope you give them exactly the tip they (don't) deserve.

by neuroelectron 6 hours ago

Afaik, the only UI spam is Apple's spam for subscription services that show up in the Settings menu every couple of weeks and after every update, similar to Windows.

How is this a superpower though? It has something to do with them saying "I won't say how to reproduce this here."

by superultra 6 hours ago

It’s not a superpower around here but most people who use phones and are getting notification spam are not tech savvy enough to build their own solution like this person did.

by neuroelectron 6 hours ago

Afaik, the only UI spam is Apple's spam for subscription services that show up in the Settings menu every couple of weeks and after every update, similar to Windows.

by dreamcompiler 6 hours ago

As an example of how AI could work and be actually useful to people, we need an AI that resides in our phones and looks at all notifications on a "virtual" screen before they're displayed to the user. If the AI decides a notification is not an ad, it displays it. Otherwise, straight to /dev/null.

Also (very important) the app never knows any of this happened.

by teekert 7 hours ago

Philips (Signify) Hue is also horrible. You open the app, want to switch on a lamp, bam "Buy these new lamps for only 250 eur". Or "You need an account", which I don't need btw, everything I paid for works thank you. When I first started I just saw my rooms listed, now the top 2 tiles are "You need an account for "protection"" and then another one "Hue Secure: Help secure your house!". You can't remove these, you have to scroll down (more) to reach the intended goal for opening the app. w.t.f. Do you know how much I have paid them already?

I am of the persuasion that a smart home should never require whipping out your phone, but I have not been able to brush away all occurrences yet. But the Hue app always motivates me to either do things via Home Assistant (including just coupling the bulb directly using ZigBee) or get a switch ASAP.

Yes Signify (former Philips), you got an ad in my face, congrats, but you also got me super annoyed and I'll be on the lookout for alternatives.

by Ao7bei3s 5 hours ago

Philips Hue lights and remotes are standard Zigbee devices. Keep the lights, throw away the Hue bridge, get a Raspberry Pi, connect a USB Zigbee dongle, install HomeAssistant. It takes some effort to set it up but then it works great.

by teekert 5 hours ago

Correct me if I'm wrong but my battery-less switches will then not work anymore I understood. I only have 1 so no biggie btw.

It does make home assistant quite important all of a sudden, now it can be off and most things still work... Hue is quite appliance-like in that sense.

by wds 3 hours ago

Just your luck: The latest Home Assistant update added support for battery-less switches!

https://www.home-assistant.io/blog/2026/11/04/release-202611...

by malmeloo 5 hours ago

You can "bind" zigbe devices to allow them to work when when the coordinator (or home assistant) is down. Devices will then communicate with each other directly. I don't own any Hue devices but they probably support it.

by Ao7bei3s 5 hours ago

I don't have any of those, sorry. I've only read a little bit and it seems like it could work at least in theory (if you have a proxy device) https://github.com/Koenkk/zigbee2mqtt/issues/3322

I share the concern on HomeAssistant going down, but it hasn't happened to me yet whereas I have gotten badly timed surprise mandatory updates from Philips before. And HA is easier to backup.

by hectdev 4 hours ago

I've moved to my own custom apps and automations thanks to AI which built a home-brew system mostly run on a Raspberry Pi. If a company offers an API, we now have the power to build the interfaces to the things we own and can skip the Ad slop. I've never been one to push hard for API access in my purchasing decisions until the time cost of utilizing them dropped so suddenly.

by plagiarist 4 hours ago

I will never again buy a product that requires an app to work, even for configuration. If I did get Hue bulbs they would be exclusively Zigbee. But I don't know if I trust that all functions are exposed and working with those.

by coldpie 6 hours ago

FWIW I use this style of light switch all over my house and it has never once shown me an ad. I recommend them without reservation. https://commons.wikimedia.org/wiki/File:LightSwitch.jpg

by teekert 6 hours ago

There's always that person ;)

But I control rooms with many lights with 1 switch, dim them, control other areas with motion sensors, and some go on and off automatically. Ah well, not really a requirement for a happy life, I know... Whereas the ad slap is a real drain...

I did make most of the things here in the house myself and saved a lot of work by not having to make all those switching wires in the walls :)

by switchbak 3 hours ago

SwitchBot was using my app as a billboard for ads too - so I left them a 2 star review. They even got back to me (or their LLM did). As a "consumer" you don't have much in the way of power, so use what you can.

by gbdubs 6 hours ago

One of the the ecosystem providers (Apply/Google/Amazon) should differentiate themselves by offering a certification level for their ecosystem that an IoT device:

- does not have a subscription fee

- does not sell data

- does not have ads or remarket

- follows basic cyber security hygiene

- is simple to set up (thinking of my parents)

- interacts purely through standard protocols

I have long delayed wiring my home with IoT devices, but would be interested in doing so if I could have some basic assurances about the experience of using it being pleasant and safe. Almost everybody that I know who has invested heavily in IoT has had to treat it like a side project to avoid the various pitfalls.

by gwd 5 hours ago

One of the requirements for the Apple App Store should be that normal alerts and advertisements should be able to be enabled separately. I want Booking.com to be able to tell me about a flight change or about a message from the place I'm staying; I don't want them interrupting me to sell me some random garbage.

by dc3k 5 hours ago

this already is a requirement. it's just never enforced, which completely defeats the purpose.

> 4.5.4 Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.

https://developer.apple.com/app-store/review/guidelines/

by jen20 5 hours ago

I thought I remembered this clause. Perhaps it's time to start a campaign to get Apple to actually enforce it against offenders like Chamberlain.

by mschuster91 3 hours ago

You can get all of these except the "is simple to set up" part if you go and spend the appropriate money on a KNX setup. Whenever you go to a venue or even many higher end hotels, their lighting and other automation stuff is almost always based on KNX.

Depending on your electrical code however, you might need to hire an electrician for the job.

by dj68k 8 hours ago

Chalk me up to another happy user of Ratgdo. I got one of the older ESP8266-based ones whose Homekit firmware has been in "maintenance mode" by the developer due to its board having limited RAM and processing power to do the things they're doing with the current boards. That was a bummer to find out since I'd had the thing for less than a year and I was using the "dry contact" system: manually wired magnetic switches on the door to tell the board whether the door is up, down, or in a state between (opening or closing). It's a very, very old garage door opener.

Since the code was put in a "best-effort basis" for future updates, it's gone from version 2.2 to 2.2.6 with numerous fixes. Most notable was software-configurable "debounce" functionality which finally solved my problem with the door tripping the magnetic reed switches several times quickly when the door comes to a stop and confusing the board about its current up/down status.

I bring it up because I have tremendous enthusiasm for people who take an idea, a cheap microcontroller, and put together a solution for people who prefer to stick with older, simple appliances but still want some sort of smart functionality. People who "make cool stuff and put it on the internet." That the creator disclosed that he's putting his focus on the newer boards and will maintain/fix issues with the older ones on a "best-effort" and then actually does it... it's fantastic. Because of this continued support and fixes, I can't recommend Ratgdo boards enough.

by eddieroger 6 hours ago

I got a pair of ratgdo32s the day Home Assistant got cut off from the ecosystem, and they've been great. I definitely understand not wanting to replace something you've got, but they're so cheap for what you get and the guy making them does such a good job that it's worth considering the upgrade if only to support ongoing development.

by atonse 8 hours ago

Had the same issue (the original ratgdo being unstable) and I finally just got the ratgdo32 and it's been working beautifully with HomeKit.

I wonder if someone will try to use AI to optimize the 8266 version to better handle RAM etc.

by 100percentjake 7 hours ago

For those curious, the apparent character-spam "RATGDO" is actually an acronym for Rage Against The Garage Door Opener.

by modeless an hour ago

When we rented our house the garage door opener was broken. The landlord sent a guy who was completely incompetent, gave up after five minutes and said we needed to buy a new one. The landlord would pay for it, but I knew that a new one would come with this MyQ scam and also not work with Homelink (car integration) which would be a huge downgrade. So I fixed it myself rather than get a free new one.

Someone should start a business ripping this crap out of garage door openers and replacing it with something sensible.

by variety8675 7 hours ago

Chamberlain made a new protocol that breaks the ability to do this with their new openers. They’ll get away with it too because there’s not many options for garage door openers and most people just buy whatever the contractor installs

by cogman10 7 hours ago

What a horrible horrible company.

It's a garage door opener it has two modes, opening and closing. The fact that they have an app you have to sign in to and provide your email to and they are actively stopping integration with the likes of Home assistant to make you use their horrible app is just absurd.

I shouldn't be getting spam because my garage door is selling my private data.

For anyone wondering, get a Genie instead. I have one for over a decade and it works great.

by wingspar 6 hours ago

I just put I a Genie last weekend. It works great with my existing Meross MSG100hk HomeKit adaptor.

by chang1 6 hours ago

Feit Electric and Arlo have also started pushing ads, probably within the past few months. Before there were zero ads... for years.

Technically it is against app store review guidelines to use push notifications for ads, unless the user has specifically opted in. I'm guessing it's difficult to catch during app review, or reviewers don't care.

> 4.5.4 Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.

https://developer.apple.com/app-store/review/guidelines/#:~:...

There is definitely no way to opt-in our opt-out in Feit or Arlo. My guess is the same with all these other apps.

by stickfigure 6 hours ago

If you want something more plug-and-play than the Ratgo, Tailwind is ~$120 and integrates with Google Home / Alexa.

I bought a house that came with a Chamberlain garage door opener. At $20 I figured I would try the MyQ device to see if it's as bad as people say. It is that bad.

I bought the Tailwind device and it is exactly what I wanted. I can tell Google to open/close the door. My only complaint is that Google makes me tell it a code to open, but you can put it in one voice prompt "hey google open the garage door with code NNNN".

by hahajk 5 hours ago

it appears the only way to use Tailwind locally is to sign up with them and get a "Local Control Key" from their online portal?

I wouldn't consider it prudent to replace one cloud-dependent service for another. Fool me once and all that.

by stickfigure 4 hours ago

If you want DIY then go with Ratgo, nothing wrong with that. I'm lazy and just want a shrinkwrap solution that doesn't suck. 95% of my garage door interaction is "hey google".

by mrinterweb 5 hours ago

I just came here to advocate for tailwind. I bought one 3 years ago. It has been great. Zero spam.

by jeroenpe 3 hours ago

I used a 10 dollar sonoff wifi relay, soldered a zener to it to power it from 5V and cut the Live tracé so it can be used as a dry contact relay.

It just need to give a short pulse to start and open/close the door.

And to read out the door state I added a LDR circuit on the GPIO that is attached to the motor LED.

Has been working very well last three years using HA. no need for any of that expensive cloud connected hardware.

by Rohansi an hour ago

I basically do this with mine too but the newer Chamberlain garage door openers do not work with this. The switches follow some protocol required by the opener which a relay would not work with.

by billfor 2 hours ago

Yeah I do the same thing but flashed tasmota instead of using the sonoff stuff. Cost me $20 and works on anything. Tasmota/esphome/mqtt is all you need.

by Aboutplants 6 hours ago

I love my 25 year old, completely dumb garage door opener. We have a button in the cars and a keypad on the outside. Plus, it’s so loud that if it were to ever open during the middle of the night, it’s a wonderful security alarm.

by brynnb 3 hours ago

I had a chip on my shoulder with something similar recently - using the Nanoleaf app to pair and control my "holiday string lights". I worked with Astra for a bit and got a script working to pair it to my Home Assistant entirely from my computer. No nanoleaf app, no apple Home app. And now I can also program it entirely from Home Assistant, too. As far as I can tell this didn't previously exist as an option for these.

https://github.com/brynnb/nanoleaf-holiday-local

by thatonehack 6 hours ago

I never (and would never) hook up myQ to my network, even my IOT VLAN. Immediately upon getting new garage door motors I installed ratgdo devices and monitor it via HomeAssistant and do get push notifications to my phone if a garage door is opened between certain times. Works perfectly… HOWEVER, this didn’t prevent me from buying Chamberlain garage door motor and thus they likely don’t give a crap and won’t stop making horrifically stupid hostile consumer decisions. There really aren’t any good options (atleast in USA).

by pastor_williams 8 hours ago

I love that ratgdo stands for "rage against the garage door opener". I bought a pair for my own garage because I wanted home assistant integration and the native garage door app disallowed that. I feel like an element of spite is in there as well. I've already paid for the machine, if you hamstring my use of it I will do what I can to cut you out of my life.

by lukeschlather 3 hours ago

We need to expand the CAN SPAM act to cover app notifications. Really for something like a garage door opener there should be class-action lawsuit options getting injunctions against this sort of behavior. Even including ads in the app seems inappropriate.

Of course the flipside is that if your thing depends on an app you need ongoing maintenance, but if you've got an advertising-riddled app spamming notifications it seems like the prophylactic is indistinguishable from the disease it prevents.

by MatekCopatek 7 hours ago

We say this about many things in tech, but IoT really seems like an area that's long overdue for some kind of open protocol standardization. The device makers can build their services on top of it and run whatever business model they want, but they should at least be forced to give us an escape hatch.

by joshstrange 7 hours ago

Z-wave/Zigbee?

There may be some licensing or something else that makes it not an “open protocol” but I couldn’t be happier with my Z-wave and Zigbee devices. I’ve never seen a push notification from many of them because they don’t have access to the Internet. The manufacturers can go out of business and I wouldn’t notice or care.

Pair that with something like home assistant, and you have perfection (in my eyes).

by microtonal 6 hours ago

Z-Wave has strong licensing requirements, but Zigbee seems fairly lenient (you probably only need certification to show their logo?). You can pick up any ESP32 with a Zigbee-compatible transceiver and make your own Zigbee device. Even better, ESPHome supports Zigbee nowadays, so you can be up and running in a few minutes:

https://esphome.io/components/zigbee/

by hattar 7 hours ago

Maybe I’m misunderstanding, but isn’t home assistant what you’re describing?

https://www.home-assistant.io/

by AntonyGarand 7 hours ago

Home assistant is a great home that includes all of the various softwares and iot protocols from various vendors, but it's not a protocol in itself.

What OP is asking for is closer to Matter / Zigbee / Z-Wave, a protocol in which any hub can control any device: And things are getting closer to a standard with these!

That is, as long as device manufacturers actually use them and follow the specs

by benmorris 7 hours ago

It wouldn't bother me one bit if apple/google banned advertisements in notifications period.

by jedbrooke 5 hours ago

Apple themselves is guilty of abusing ads in notifications with the F1 movie add from apple wallet a year ago [0]. At least since then they’ve added the ability to turn off ad notification… from the wallet app. (ads are still enabled by default).

0: https://www.macrumors.com/2025/06/24/apple-wallet-notificati...

by ryandrake 9 hours ago

Pro Tip: you don’t need to buy one of the very expensive official ratgdo devices, if you are adventurous and can solder. The software is free and for a few bucks and a little time in KiCad you can build yourself a PCB, solder on the ESP32 and some electronics, and you’re off and running.

by thedanbob 8 hours ago

Don't even necessarily need to solder: I upgraded my garage door with a Shelly relay, a reed switch, and ESPHome. Maybe the ratgdo devices are doing a bit more, I'm not familiar with them, but there's probably still much cheaper pre-built boards available that can do the same job.

by 100percentjake 7 hours ago

On a chamberlain like this the ratgdo is able to give you partial open/close, light control, button feedback, etc. Have I ever needed to open my garage door to 48%? No, but I could.

by theoreticalmal 9 hours ago

My very first tech project was a relay board, raspberry pi, and learning python. Long before AI. It was very fun

by TheCapn 7 hours ago

Similar story for my detached garage on my first home.

I got a Raspberry Pi, added a camera, pointed the camera at my man door then added the following features

- Push notifications if garage door or man door were left open more than 10 minutes or opened between 10:00PM and 6:00AM

- Camera takes photos every second while the man door is opened or motion detected, uploaded to my NAS

- Door open/close control via buttons or voice command

Was a fun little project. I abandoned it when I moved to a house with door openers which run off the myQ app. I haven't had the ad issues OP has (yet) so I've not been motivated to rebuild a custom solution.

by qazxcvbnmlp 5 hours ago

I want to feed all my notifications through a jev like model with a prompt I control to determine if they are shown or not. Not rely on the out developer to behave, just filter if spam then ignore.

by blantonl 6 hours ago

There's a term for this. It's called "enshittification," and it's a cancer on our technological society.

I've never understood how technologists, product managers, and marketing people can sit in the same conference room and collectively decide, "Hey, let's start sending unsolicited marketing push notifications to our users, and while we're at it, we can make another $1,000 a month by stuffing Google Ads into the app."

And then everyone around the table nods their heads and says, "Great idea, let's do it!"

If I were in that room, I'd be throwing chairs. I'd be so vehemently opposed to this kind of garbage that the meeting would come to a screeching halt.

I genuinely cannot comprehend the decision-making process that leads an entire room of supposedly intelligent people to agree that deliberately degrading the user experience for a few extra dollars is a good business decision. These are not freemium products - these customers paid for these products!!

by plagiarist 3 hours ago

You would be fired and they would hire someone who will put the ads in. The only solution is to neither work for nor purchase from these companies. Unfortunately people don't have enough social safety net to quit a job on principle.

by hobo123 5 hours ago

It's probably small companies that get bought by some PE fund, PE wants higher dividends so they push management to get "creative", management tells people "ok guys, we cannot increase sales more, so milk the customer with some ads."

by mindslight 5 hours ago

> If I were in that room, I'd be throwing chairs. I'd be so vehemently opposed to this kind of garbage that the meeting would come to a screeching halt.

Sure. Then they'd call security, and reschedule the meeting to the next day. The next day, everyone would say "Great idea, let's do it!"

The problem is the incentives created by the pervasive digital backdoors products now ship with (for decades now). Consumers just aren't that forward thinking or self actualizing (or they would have never adopted these products in the first place!). Once one company does it and gets away with it, then all the rest follow.

The only thing that is really going to fix it is laws, and good luck with that with our corpo-pwned government. If you sold someone a device that you had added retained remoted access to, and then used it to harm them and benefit yourself, you'd be facing CFAA charges - even if you slipped some legalese nastygram in the box along with it. But when a corpo does the same thing, it's just a "profitable business practice".

by Intrepidatious 7 hours ago

I have the dreaded MyQ because my new Honda didn't come with Homelink buttons and they make you tie into MyQ to access the opener via CarPlay. If any of this has a CarPlay solution, I'm in.

by iaresee 6 hours ago

It works in the Home app and therefore in CarPlay. You can ask Siri to open your garage door or setup geofence actions in Home.

by wingspar 9 hours ago

I went with a Meross MSG100hk garage door interface. It works with HomeKit and I added a HomeKit automation to turn a light on/off based on door open status.

by torginus 3 hours ago

Its weird manufacturers even try this - I'd bet a significant amount of money that this fancy garage door opener was marketed as a premium solution - and you couldn't just replace the motor and endstop sensors, you had to replace everything.

Meanwhile there are Zigbee solutions you can order from Aliexpress for like ten bucks, and those only need to be wired into your existing opener, so install consists of an hours's worth of fiddling with wires.

by newguytony 9 hours ago

Ekyro smart garage door opener on Amazon. $30 and no subscription. 15 minutes to install.

by driverdan 7 hours ago

Still requires using a 3rd party service, sending your data to them, and their app. They could sell your data or include ads too.

by ceocoder 5 hours ago

I use cheap z-wave tilt detection sensors with home assistant to keep track of garage door state. After 10 minutes there is an Audible reminder that “Garage Door is Open” and the light behind my tv turns bright red. It is simple and works beautifully.

by ww520 4 hours ago

For an older opener that has a button on the wall, consider installing a fingerbot or switchbot next to the button to physically push it. These can be controlled remotely.

by fourneau 6 hours ago

I went through this exact pipeline last year.

Chamberlain used to have a HomeBridge, that connected to HomeKit, device that would sit in your garage and sit on your wifi network. It would pair with the opener similar to how a normal wall-mounted garage door panel would. Not only was this setup a little clunky, it was slow. The Siri -> Door open process would often take 5-10 seconds. This wasn't great, but it worked. Sort of.

Then, they did two things that made my blood boil: they discontinued support for it and prevented you from repairing the device with their myQ app, then started using notification for ads.

When I was about to sink an unhealthy amount of time into a garage door opener, ratgdo came in and rescued me. Not only was it simple to install but it was lightning fast. On the same network, it started opening and closing the door the second the Siri command went off. I can only assume that the previous system used to do roundtrips to Chamberlain and the connection wasn't the fastest in the garage.

Ratgdo man, if you read this you have my thanks (and my money, obviously.)

by YackerLose 4 hours ago

For every blogger who designs their own way around this, there are somewhere between 1000 and 10,000 users who just put up with it

by alexfromapex 2 hours ago

They sent me a new control board in the mail anyways because I couldn’t get the old homeowners’ info to dissociate with my door opener in the MyQ app

by chung8123 3 hours ago

I use Inovelli switches in my house as indicators of status. Red Flashing doors unlocked, faster red flashing garage door open, etc. I like not having to use my phone to find notifications. The light that would go on when the door was up made me think of this.

by herf 5 hours ago

I pulled out the "free" MyQ stuff years ago and replaced with the "timer" Chamberlain controller that closes the garage door after an interval. But I don't recommend it - this hardware is bad: when the capacitor fails after 4 years, it opens the garage door and stays open (even the updated model failed after a few years). This company is on the wrong track.

by cdurth 5 hours ago

I interfaced an ESP directly with the garage door button and a limit switch, connected and controlled with a Telegram bot. Been working great for years and cost me about $5.

by philips 6 hours ago

I have used https://konnected.io with my newish Chamberlin. It works great with HomeAssistant and bridging it into Apple Home.

by polyterative 6 hours ago

As far as I know, it is not allowed on Android to send advertisements in notifications. Not even in a dedicated channel. But Amazon does it no problem. And plenty others. Very tired

by hn_submit 6 hours ago

The sad part is most users won't have the ability or skill to replace the garage door controller and software like you did. That's what the manufacturer's counting on thereby making it still worthwhile for them to flood them with spam.

And if everyone's doing it what choice do you have? If someone actually starts selling these devices there's a good chance the manufacturer will sue for patent infringement, DCMA reverse engineering or some other guff.

by luisgvv 6 hours ago

As much as you hate to see this, we need regulation around this

by amluto 6 hours ago

Interestingly, I have a commercial device from Chamberlain that’s the opposite: it doesn’t work with ratgdo or even Chamberlain’s MyQ crap. The only way to control it is with a Security 2.0 remote (or whatever it’s called) or plain dry contacts. And it gives an ample selection of dry contact control and status terminals.

I assume this is because commercial users have control stations that use dry contacts, and the modern crap is simply a nonstarter.

by doawoo 4 hours ago

Best thing I did when I got our new place was get a Z-Wave relay module (any smart relay will do) and wired it up exactly like a push button on the opener, just a quick button press in Home Assistant to flip the relay on/off in a cycle making the door open or close. Cheap, easy, entirely offline :)

by sc970 4 hours ago

I just installed a Shelly 1 Gen 3 relay inbetween the garage door opener and the button. Now controlled via homeassistant, or shelly button on my keyring.

Although it only triggers the button. So no information on whether it is opened or closed.

by whiskeykilo 5 hours ago

I am also a happy user of RATGDO thanks to Genie royally screwing up an update to their Aladdin Connect software: https://github.com/home-assistant/core/issues/181420

I'm keeping it simple now, HomeKit or bust for the smart home.

by seshagiric 2 hours ago

I am surprised no one mentioned the even bigger scam Amazon is perpetuating. After setting up MyQ device, you'd be "delighted" that it automatically appears in your Amazon account. To further delight the customers, Amazon drivers can open your garage using MyQ and "securely" place a package in the garage, close it and leave.

You see when you install MyQ, by default it opts you in for in-garage delivery. And here's the beauty, you also need a PHD to figure out how to disable the setting in Amazon. (reference: https://support.chamberlaingroup.com/s/article/myQ-and-Amazo...)

by digitalsushi 7 hours ago

I unplugged my myQ garage door opener and just manually open it, the spam was so bad. Whatever, I will walk into the house, open the door, and pull in, and close it, to not deal with it. Also, I've become paranoid about hacks lately and once a hack can manually unlatch the lever and get inside, I'm cooked anyways.

I have LG washtower thinQ enabled, and the phone app was maybe worse than the garage door opener app. But, at least, the app can be deleted, and the data endpoints are still emitting sensor data enough for home assistant to pick it up. No spam because no app. I get an email when the washer/dryer finishes, I know to plop wet clothes into the dryer, and that works great. That's a good experience. Getting phone ads for soap at 2am is not a good experience.

by VTimofeenko 6 hours ago

ThinQ has a fully local replacement that lets compatible devices work with home assistant:

https://github.com/anszom/rethink

by elephanlemon 4 hours ago

Can’t you just get a remote that you can put in your car?

by otter-in-a-suit 8 hours ago

Blink, the AMZN owned WiFi cameras (which, credit where credit is due, have been running flawlessly without a subscription for 5+ years for me), recently started sending me emails for "troubleshooting" a camera that's down. The "troubleshooting" is replacing the batteries. It comes with an ad to buy a specific brand of lithium batteries. On Amazon. They haven't had the audacity to send a push notification for this yet.

I have a zero tolerance policy for spam - notification permissions get taken away on the first offense, emails get marked as spam. I've had the ratgdo on eternal to-do list for a while, so this post speaks to me.

by wayeq an hour ago

Interesting to think of the garage door innovation timeline.

We went from:

"gee, it sure would be nice if I didn't have to get out of my car and lug this heavy door open with my bare hands"

to:

"we can use the garage doors to advertise unrelated products to the owner, and/or participate in massive bot nets to ruin other people's lives!"

by gimlichgu an hour ago

The unsurprising outcome of building your home out of ... proprietary software ? Wait why would you actually do this?

by dllu 2 hours ago

I use my Tesla Model S as a garage door opener. It has Homelink and I can trigger it from the Tesla app. Most expensive garage door opener ever.

by anticorporate 9 hours ago

I have had a MyQ-enabled garage door opener for about a month now. I wanted a dumb one, but the installer company who replaced the garage door didn't offer one. Instead, it's just sitting there, denied Bluetooth and WiFi access until I get around to hooking up the z-wave dry contact relay controller (or perhaps ratgo, but I already have a spare relay sitting around).

A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.

I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.

But, why?

It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!

I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/

by flexagoon 8 hours ago

A thief going into your basement by hacking your garage door may not be a realistic scenario, but your garage door being hacked and used in a botnet or intercepting your traffic and injecting malware into it is very much a thing that may happen.

by anticorporate 5 hours ago

Oh, I absolutely agree. I have a fair amount of confidence that no device in my home is going to be able to talk to the outside world, at least without me knowing, but that's only because of all of the ridiculous things I've done to make sure they can't - isolated networks, alternative firmwares, etc.

For the garage door opener, I haven't actually gone in to see if I can completely turn off the WiFi/BLE capabilities. If I can't, I'm still only going to allow control through the relay, but I'm considering putting the receptacle itself on a controller too so it only gets power when an open/close request is received. That'll break the manual button control, though, so I'll have to also add a new button that isn't actually directly connected but instead triggers the power-up request prior to the open request... it's a good thing I like building Rube Goldberg machines.

by jfengel 3 hours ago

Ah, spam from a garage door app.

On Quora there has been a slew of spammers trying to sell garage door openers. It's probably just a scam, but it seems a pretty niche scam.

by harrisonpage 3 days ago

In which I bypass myQ for an open source solution

by phrotoma 9 hours ago

Great post, right to the point. Love it.

by jawns 7 hours ago

I have myQ also, but solved this problem in a different way.

I use NextDNS, which allows me to block ads (including a lot of mobile ads) at the DNS level.

I disabled all notifications for myQ.

And I configured the garage door to auto-close at 9pm.

by spacebouy 7 hours ago

I do the same. Does your myq app take a long time to load when opening? Mine takes a very long time (>30 sec. sometimes) despite troubleshooting measures, and I'm wondering if it's because of blocked advertising.

by asveikau 5 hours ago

A few months ago I read that Security 3.0 breaks ratgdo, and that maybe the wired buttons aren't using the wires for anything but power, they open the door through encrypted Bluetooth.

The way around it is to solder onto the contacts of their proprietary buttons.

Anyone have updates on that situation?

by mdarens 8 hours ago

this echoes my own frustrations with the user hostility of chamberlain/myq. an added bonus is that in the app they force you to use to control the door instead of integrating with home automation standards, the video banner ads will force whatever audio you might have playing on your device to pause. they're testing the limits of hanlon's razor over there.

i've been meaning set up a dedicated domain/website just to collect complaints about this company's behavior, alternatives, workarounds for their failures like the one posted here recently [1], and importantly, laws. we need laws.

mentioned already in these comments: granular control over notifications between marketing & functional, and no circumvention by intermingling the two. home automation devices may be allowed to traverse wans to offer remote control for non-vpn/sd-wan users, but should not have their core functionality _or_ initial setup depend on an internet connection.

finally, locked devices produced by companies over a some market cap or another and their subsidiaries should be required to offer a bootloader for user/open firmware after some reasonable period of time to mitigate some of the mountains of ewaste we are producing with this stuff.

1. https://news.ycombinator.com/item?id=50525260

by jadar 3 hours ago

Even Apple themselves participates in the push notification advertising these days. For me it's the quickest way to get your app's notifications disabled.

For the OP, do you really need to fire off expletive-laden rants at these people? Why harbor such hatred in your heart and words when you could just say, "Here's what bugged me, and how I fixed it. Now I don't need your product." That's all you need to say.

by lostlogin 4 hours ago

> I was able to rebuild Dad's solution in software with Slack

This hack could be monetised at this step, by allowing adverts at this step. This would complete the (tech) circle of life nicely.

by corndoge 5 hours ago

It's a cool solution. It's too bad they don't care and according to market dynamics shouldn't care. One user opted out. You lost time to building your own solution and they lost nothing. Many such cases.

by elephanlemon 4 hours ago

They lost a customer, I will never buy a Chamberlain garage door opener after reading this thread. Why are people buying these things when Genie exists?

by jsisto 6 hours ago

Using the eufy app I am constantly frustrated by things like this. I don't get notifications but when I try to use my robo vac outside of its schedule I am bombarded with ads that are hard not to click and then I have to exit the app and restart.

by bob1029 4 hours ago

There are some appliances that simply don't make sense to grant IP addresses and network connectivity. The moment your magical home server takes a lightning strike you are back in the stone ages, potentially significantly worse off than someone who just had a bunch of dumb shit in their house.

I don't know why we approach everything like this as a challenge. Certainly, we can make this work. Technically there's nothing stopping us from integrating anything with anything else. But, what is the cost of maintaining this? How many others in your household are into your hobby as much as you are?

by kccqzy 4 hours ago

Garage door openers not only have a manual operation mode (pull the door up manually assisted by the springs) but in some locations are also required to have battery backup. I don’t run my home server with any SLA; and indeed it’s impossible in case the mains power is out. It’s all part of being prepared for power outages.

by jareklupinski 6 hours ago

> I continued using it because I trusted that notifications were meaningful...until recently (October 2026)

it should be illegal for someone who had a good idea once to be allowed to leave that good idea in the hands of others

by TazeTSchnitzel 3 hours ago

OP, if you're reading this, I love the Nessie in the corner.

by 1970-01-01 4 hours ago

Dad's mercury switch was a better design. This is introducing a massive attack surface.

by boxed 4 hours ago

Plus putting messages in slack instead of showing the status is not great too.

by etatester 8 hours ago

I'm really, incredibly disappointed that Apple (or Google for that matter) doesn't enforce some sort of CANSPAM on notifications.

I need your business notifications, I do not need or approve of your advertising/product updates.

For my mobile OS, all notifications look the same. "AI priority" is the only attempt at this but I don't need AI priority if I have a very tight-knit circle of apps that can send notifications.

Then one important app sends me spam and I turn it off immediately.

by htrp 7 hours ago

those sweet sweet app store fees

by throwitaway222 4 hours ago

Glad to have seen this since I will be looking at garage door openers soon.

by nikanj an hour ago

I can just picture the meetings inside the companies, where engineering is trying to explain that abusing notifications for marketing will anger people, and management walking all over those objections

by ricardo81 7 hours ago

Had a similar experience with a niche phone made in the UK from Wileyfox. After they entered administration all the app updates contained some funky 'add ons'

by switchbak 2 hours ago

If you're lucky, you'll have an older garage door opener - and they're controlled by simple switches (normally open). You can drive that with buttons, relays, wifi/bluetooth/zigbee/whatever. You can even use access control panels that suck less and aren't as insecure as what the manufacturer offers (hopefully).

Be sure to turn off/disable their old school RF stuff too.

Not surprising that they're pulling a John Deer and making simple things proprietary so they can enshitify you into their ecosystem.

by elbistec24 5 hours ago

Am I missing something here? Why not just disable marketing notifications instead?

by harrisonpage 5 hours ago

There's no option for that

by traviswingo 6 hours ago

Whenever I see something like this, it reminds me of how frustrated I am with the majority of people for not only accepting this, but falling for it.

The reason ads come at us from every fucking angle of life is because they work. That’s unacceptable, imo.

They don’t work on me, they don’t work on you, so who the fuck do they work on?

The answer: most people. And that’s why they keep showing them.

All of the anti-patterns we all hate only perpetuate because they work.

We really need to figure out a way to educate people better so that these practices stop working. And I’ve no clue how to do that (tried with my parents, failed miserably in a cloud of “this is too confusing I don’t care.”)

by bluedino 6 hours ago

Home automation was better off with X10

Uses your existing wiring, etc.

by dpkirchner 5 hours ago

Then they went off the rails advertising their tiny spy cameras in pop-unders, as one does.

https://www.uxmatters.com/mt/archives/2009/10/images/figure_...

by howunfortunate 5 hours ago

Normies are just not that offended by ads

by yakshaving_jgt 10 hours ago

Ah, this is so cool.

When I eventually buy a house with my own garage, I'm totally adding the garage door to Apple Home so that I can operate it with my voice while inside my helmet on my motorcycle, and not have to take my gloves off and get the remote control out. I hadn't thought of that possibility.

by afn 9 hours ago

They seem to have disappeared, but there was a company called Flash2Pass (later Flash To Open) that made a garage door controller activated by flashing your high beams twice. I have it on my bikes and it makes for a really seamless entry; I don't have to take my hands off the controls, and the range is long enough that the door is open by the time I ride up.

Another option: https://www.youtube.com/watch?v=d3rfaCfImwE :D

by vocram 9 hours ago

Unluckily they discontinued making that second option.

by yakshaving_jgt 9 hours ago

That video caught me off guard!

by HalcyonCowboy 9 hours ago

That’s exactly why I setup an open source device on my older garage door. It’s only accessible from my local network, and I have my appletv setup as a HomeKit hub, so I can double tap my off brand cardo to give the voice command to open the garage door on my bike. My only irritation is that each major iOS update changes the settings on condirming the command, so out of nowhere my phone will ask to be unlocked to confirm the command. Then I have to figure out what setting changed on iOS to reconfigure it again.

I also have a nodered automation setup that sends a push notification if the garage door is open for more than 30 minutes, so I don’t accidentally leave the garage open overnight. Works great.

by xur17 4 hours ago

This is exactly what I do with mine. I have a ratgdo connected to home assistant with my garmin (watch) setup to control it. Being able to open / close my garage without pulling anything out and just ride my bicycle in is pretty amazing.

by tonymet 3 hours ago

I love this solution, and would encourage being very careful when sending wireless garage operations .

Wired and wireless layer 2 protocols have retransmission and your layer 7 app can receive duplicate commands. Be sure to add deduplication logic to the command e.g. using a nonce or transaction id. You have to be very careful that your layer 7 app doesn’t play the “open” command twice and close the door.

I’d happily buy your product to replace my MyQ. I hate the spam, and it’s just plain buggy. Plus the base station runs loads of unwanted services. I haven’t fully audited it, but I’m sure it’s a security nightmare.

by JumpCrisscross 5 hours ago

Tailwind is also great.

by SoftTalker 6 hours ago

At the end of the day the opener is a motor and a couple of limit switches on the door track. Should be easy to totally bypass whatever "smarts" it ships with, using an arduino or something.

by MarkusWandel 4 hours ago

Well, there's also the stall sensor, which at least on my old garage door opener (haven't looked inside the Chamberlain) was an optical RPM sensor on the motor shaft. And the upper/lower limits on the Chamberlain aren't knobs that move contacts any more, they're software. You have to go through a setup routine to set them. With, I might add, annoyingly large step size, where the perfect "down" position is about halfway between available steps.

by SoftTalker 2 hours ago

Stall detection with auto-reverse should still be doable, my old non-digital opener from the late 1990s has it.

You can still find a few "non-smart" garage door openers, for now. They tend to be the lowest tier models, who knows if enough people will keep buying them that manufacturers will keep offering them. And worst case, you can just open the door manually. They are spring assisted and not very heavy. For my entire childhood I was the garage door opener whenever I was going somewhere in the car with my parents.

by nticompass 8 hours ago

I have a Chamberlain/myQ garage door opener, but I do not own the house (it's a townhouse I am renting). This probably limits my ability to install/use Ratgdo.

I also hate the amount of ads the myQ app has, like it's pretty much nothing but ads (and reporting this to the Play Store does nothing).

Currently, my garage door opener is connected to my WiFi (on its own "IoT VLAN") because I once had to use myQ to open my garage whilst away to let my friend into the house.

Normally, I just use a "normal" garage door opener remote (and my car's built-in HomeLink buttons).

by Scene_Cast2 9 hours ago

Out of curiosity, how's the device doing on FCC certification?

Using a pre-certified module doesn't let you bypass certification.

by dkobia 6 hours ago

Thank you for writing this and for that last sentence - "To anyone at Chamberlain responsible for myQ...". The MyQ spam is atrocious and the repeated attempts to rent seek for what is a basic feature have been grinding on me for a few years now.

by jjtheblunt 7 hours ago

That’s cool and i loathe the myQ ads too. No idea what idiotic marketing decision drove them, as i eagerly search regularly for alternative lifters. Like is Chamberlain the only game in Oz and Europe like in the US?

by bluGill 7 hours ago

Even in the US they are not the only game. They are just the biggest, but there are other options if you look for them. Don't let a tech install whatever though, you need to demand something else.

by classified 6 hours ago

As long as they're not targeting your garage door AI, persuading it to autonomously buy all those shiny garage-door-enhancing products...

by htrp 6 hours ago

this is just the rokufication (enshittification of smart TVS) expanded to all physical devices.

sell it as a loss leader and make the money up on ads / revenue. Once you install something (physically), it's almost not worth it to uninstall it. Expect this with all "smart" iot devices

A MyQ costs 50$ (sometimes down to 19.99 on sale), there's a reason for that.

by j117noai 5 hours ago

> I offer my sincerest Fuck You

Data from: Hacker News, provided by Hacker News (unofficial) API